Specification
M680 Mortar Sprayer Package |
|
Maximum Working Pressure |
1000 psi |
Maximum Air Inlet Pressure |
100 psi |
Minimum Inlet Air Flow (Typical) |
30 standard cubic feet per minute |
Minimum Inlet Air Flow (Pump Only) |
8 scfm per gallon at 100 psi |
Pressure Ratio (Fluid to Air) |
10:1 |
Air Motor Piston Diameter |
7.5 in. |
Stroke Length |
4.75 in. |
Lower Output |
41.9 cu. in. per cycle |
Flow Rate at 30 cycles per minute |
5.44 gpm |
Flow Rate at 60 cycles per minute |
10.88 gpm |
Air Inlet Size |
3/4 npt(f) (Chicago Fitting) |
Fluid Inlet Size |
2 in. Cam Groove (Male) |
Fluid Outlet Size |
1 npt(f) with a 1 in. Cam and Groove Fitting |
Weight (without fluid) |
250 lb, (with 25 ft of 1 in. hose and 10 ft of 3/4 in. hose) |
Sound Pressure |
118 dB(A)* |
Sound Power |
118 dB(A)* |
Dimensions |
|
Height |
44.5 in. |
Width |
27.5 in. |
Depth (pump on cart only) |
32 in. |
Deep (pump on cart with hopper) |
37 in. |
Maximum Pump Speed, Do not exceed maximum recommended pump speed of fluid pump to prevent premature pump wear) |
|
Spraying |
40 cycles per minute (typically less than 10 cycles per minute) |
Flushing |
60–90 cycles per minute (only when pumping flushing fluid) |
Wetted Parts |
|
Entire System |
Stainless steel, UHMWPE, nylon, plated steel, anodized aluminum, FX-75 |
Pump |
Stainless steel, carbide, PTFE, UHMWPE, solvent-resistant o-rings |
Hose Kits |
Nylon core, plated carbon steel fittings, anodized aluminum, nitrile gaskets |
Notes |
|
* Spraying simulated acoustical texture under typical conditions as specified by the material manufacturer. |